EX59 Waterproof Compression F-type Connector

Model

SFJT-EX59CP
Brand

Seehai
Price

Call
Description

High quality copper body with bright nickel plating

Screw can bear torsion 30 of Pound*inch (about 3.5N*m), no screw stripped.

About connecting with the cable, this kind of connector is more convenient to connect the cable than which connector is clamped to the cable.

Quantity :

Describe
Product
Technical
Specification
Customers'
Comment

Describe Product

The inside connector is with silicone rubber waterproof ring, to resist moisture and dust.

Applicable to the cable quad-shield of ES59, F59 HEC-2

Specifications

Specification:

No.	Item		Connector for RG6 cable
1	Connector Type		F-type (British)
2	Operating Frequency Range		5MHz～1000MHz
3	Impedance		75Ω
4	Insertion Loss	5MHz～300MHz	≤0.05dB
5		300MHz～1000MHz	≤0.1dB
6	Return Loss	5MHz～300MHz	≥30dB
7		300MHz～1000MHz	≥30dB
8	Screening Attenuation		≥100dB
9	Contact Resistance	Inner Conductor	≤10mΩ
		Outer conductor	≤5mΩ
10	Insulation Resistance（DC 500V）		≥1000MΩ
11	Withstanding Voltage		AC 1.5KV, 1min, no breakdown
12	Water and fog resistant（SCTE standard: ANSI/SCTE 60 2004 red dye，120 hours，high-low temperature cycle，test condition please check Tips 1）		No leakage
13	Water immersion test (24h)		Insulation resistance≥200MΩ, The resistance voltage meets the requirements of item 11
14	Resistance to damp heat test	Withstand voltage	≥800V
			(40℃±2℃,93%±3%,24h×21)
		Insulation resistance	≥250MΩ
			(40℃±2℃,93%±3%,24h×21)
15	High temperature insulation resistance		≥500MΩ
			(85℃±5℃,16h)
16	Low temperature insulation resistance		≥1000MΩ
			(－40℃±5℃,2h)
17	Working torque strength of connector		≥3.39 Newton-meters
18	The length of connector （after finished the compression）		≤25mm
19	Connect strength of connector and cable (Double shield cable)		≥20kgs
20	Universality of connector		The same model connector can be used in F59 HEC-2 cable with double, triple and quad-shield.
21	Operating temperature		-40℃ - +60℃
Tips 1： SCTE standard: ANSI/SCTE 60 2004 Resistance to damp heat test method. Environmental temperature: upper limit 60±1℃, lower limit 1.7±1℃. Put the connector on this environment to test 120 hours, and looping 10 times on the temperature limits. Each cycle must be maintained at a maximum temperature of 300 + / -20 minutes.